Loads for.416 Remington Magnum

[Rod]

I bought myself a new R8 PH. The barrels with her 375H&H and.416 Remington Mag. The rifle is still in the shop while I wait for the permit.

Anyway this is the first 416 Remington I’ve had. Looking for a load. Preferably with ADI powders. I’ve got a few hundred 400 and 410 grain Woodleighs and just as many Bertram’s in the same weight sitting on the bench.

So, what are your recommendations.

IMG_7243.jpeg

IMG_7242.jpeg

Thanks
Rod

[mchughcb]

I was using 82 grains of 2209 with 400gr Woodleigh.
Velocity was about 2290fps from memory. Accuracy was good.

[9.3M03]

6258DC2D-06A0-431D-924C-427C4382129D.jpeg

Hi Rod

Have been using the load per attached on waterbuffalo in recent years. Blaser r8 ph

Cheers

,
Mark

[9.3M03]

Apologise for it being upside down. It isn’t in native.

[Rifletuner]

I have been using 73gn of 2208 with Woodleigh & Hornady 400gn bullets. This is in my Mauser, not a Blaser. But is not a hot load and should work fine. I didnt crony this, so dont have a velocity.

[Rod]

Thanks gentlemen

Rod